Shanghai Yueda New Industrial Group Co., Ltd.
Main products:Harvester
Products
Contact Us
  • Contact Person : Mr. Gao Galen
  • Company Name : Shanghai Yueda New Industrial Group Co., Ltd.
  • Tel : 86-515-88386289
  • Fax : 86-515-88386290
  • Address : Shanghai,Shanghai,NO.1118 CHANGSHOU ROAD, SHANGHAI, CHINA
  • Country/Region : China
  • Zip : 224005

Backhoe loader

Backhoe loader
Product Detailed
Related Categories:Loaders
Related Product Searches:Backhoe loader,High Quality,backhoe loader, loader backhoe,wzc-20
Backhoe loader, is an engineering vehicle belong to construction machinery/construction equipment
OverallDimension
1Overall length(with bucket on ground)5840(mm)(Standard bucket) 5800(mm)(Four in one bucket )
2Overall width(at stabilizer )2240mm)
3Width (to outside tyre)2057(mm)
4Width of load Bucket2313(mm)(Standard bucket) 2100(mm)( Four in one bucket)
5Height of cab2720 (mm)
6Max. operating height of digging boom3548 (mm)
7Wheelbase2155.5(mm)
8Back wheel Tread1557(mm)
9Fore wheel Tread1714(mm)
10Min. ground clearance355(mm) for 2WD 275(mm) for 4WD
11Traveling speed(Km/h),4 forward and 4 reverse
(1) gear forward/reverse5.8/7.0
(2) gear forward/reverse10.5/12.6
(3) gear forward/reverse20.1/24.3
(4) gear forward/reverse40.2/48.6
Main Loading Technical Specification
1Rated load1700(Kg(Standard bucket) 1500(Kg)(Four in one bucket)
2Operating weight7800 Kg(Standard bucket) 8200 Kg
3Lifting capability to full height>2500 Kg
4Capacity of load bucket1.0(m3)(Standard bucket) 0.9(m3)( Four in one bucket)
5Max. breakout force>40kN
6Max. dump clearance2611(m(Standard bucket) 2550(mm)(Four in one bucket )
7Max. Dump reach726(mm)(Standard bucket) 744(mm)
8Dumping angle at full height43.5º(Standard bucket) 45.5º(Four in one bucket)
9tilting angle of bucketOn ground position40.20
In the transportation position43.50
10Max. digging depth(with bucket bottom horizontal)191mm
11Min. turning radius
(1) Outside of bucket5280(mm) for 2WD 5670(mm) for 4WD
(2) Center of front wheel3795 (mm) for 2WD 4300(mm) for 4WD
12Lifting time of loading bucket≤5.1(sec.)
13Lowering time of loading bucket≤4.9(sec.)
14Dumping time≤0.9(sec.)
Main Digging Technical Specification
1Rated digging bucket capacity0.2(m3)
2Max. digging depth4365(mm)
3Max. digging force>56.6+10kN
4Max. digging radius5390(mm)
5Max. dumping height3510(mm)
6Central offset550mm
7Swing angle1800
8Max. rollback angle of digging bucket2010
Diesel engine
1ModelCummins 4BT4.5-C99
2TypeDirect injection. Turbocharged. Water cooling
3Rated output74 kW / 99HP
4Rated speed2200rpm
5Total exhaust of cylinder4.5(L)
6Compression ratio18.51
7Inter-bore of cylinder/stroke4X102/138(mm)
8Model of AlternatorDelco Remy 23SI
9Parameter of alternator24V/50A
10Voltage of starting motor12(V)
11Model of starting motorDenso R2.5
12Max. Torque at specified speed414N.M@1500rpm
13Starting typeElectric
14Min. specific fuel consumption225(g/Kw.h)
15Net weight338Kg
Transmission System
1. Torque Converter
1ModelCARRARO
2Cooling typePressure oil circulating
2. Transmission case
1ModelCARRARO
2TypeSynchromesh mechanical shift
3Gear shift position4 Forward and 4 reverse gears
3. Axle and Tire
1ModelCARRARO
2Type of main reducerspiral bevel gear, single stage
3Type of final reducerSingle stage planetary
4Max. steering angle550
5Grade ability>30%
6Max. drawing force70±10%(kN)
7
Rear tire 19.5L-24R4-12PR
Working Device Hydraulic System
1Model of oil pumpP257A467PRZA12-6
2System pressure215(kgf/cm2)
3Model of priority valveWALVOIL SD16/2SD16/6
Steering System
1TypeFore wheel Steering
2Model of steering pumpP257A467PRZA12-6
3Model of steering gear150-1219
4System pressure140(kgf/cm2)
Oil Capacity
1Fuel(diesel)151(L)
2Engine lubricating oil11(L)
3Oil for converter and gear box18.5(L)
4Oil for hydraulic system110(L)
5Oil for driving axles(F/R)7.617(L)

Backhoe loader

Other products


Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.